20 Things You Should Have To Ask About Upvc Front Door Lock Replacement Before You Decide To Purchase It
UPVC Door Lock Replacement
UPVC doors are a great security measure against burglaries. They do have some limitations, which can be overcome by installing a deadlock.
It's time to replace the barrel lock if you feel that your uPVC door lock feels loose. This simple DIY project can enhance the security of your home and improve its appearance.
Remove the old lock cylinder
You could have a damaged lock-cylinder if you notice that your front door feels fragile or the lock is struggling to turn. It will increase security and ensure smooth operation by replacing it. The process is simple and should take around 30 minutes. The only tool you'll require is an screwdriver. To begin, open your door and take a look at the edge of the lock the cylinder. You will see a screw there that is approximately in line with bottom of the cylinder. Take it off using the help of a screwdriver, and store it in a safe place.
You'll have to know the size of your current cylinder so you can choose a suitable replacement. Typically, the sizes vary between 60mm and 110mm. To determine the size, first, you'll need to locate the screw that is on the faceplate of your lock and then remove it. You can also try to turn the lock handle using the key while the cylinder remains in place to see how much it shifts in each position.
Next, you'll need to determine the cylinder's diameter and length of the cylinder cam. These measurements will help ensure that your new lock fits the door you have. The dimensions of the lock can differ based on the kind of uPVC. You'll need to pick the replacement cylinder which is the same size or a bit larger than the existing one.
Once you've got the measurements then it's time to take the old cylinder from the door. It's not difficult, but you must do it correctly to avoid damaging your door or frame. Make replace upvc door lock that the door is secured or propped up to ensure that it doesn't close between steps.
If you don't want to do it yourself, hiring a professional locksmith is an excellent choice. They can offer expert advice, flawless execution and peace of mind. They can also aid you in selecting a safe and secure lock system. However, DIY has its perks, including saving cash and gaining new techniques. All you require is patience and the right tools like a Phillips screwdriver. The process of changing your uPVC lock isn't as difficult as it appears.
Installing the new lock cylinder
It is crucial to follow the right steps and use the right measurements when replacing a lock at your front door. This will not only allow you to avoid problems in the future but will also keep your home secure and allow you to use keys on both sides of the door. You should measure the uPVC lock's overall length as well as its backset and cylinder dimensions before replacing it. These measurements will ensure that the new lock cylinder fits into the uPVC frame and operates properly without gaps or security issues.
The first step in the process is to unbolt the door handle by loosening the screws that hold it using a screwdriver. Next, you need to locate the screw that holds the lock in place and then remove it. Next, you can remove the old lock cylinder by inserting a key into the cylinder and turning it to both the left and the right. If the key is in one of these positions you should be able to remove the cylinder by pulling it out of its slot.
Installing the new cylinder on the front door is easy. You can follow the same steps you used to remove the old one. You should be aware that the new cylinder won't fit in the space left by the old one. This is because the cylinder must be aligned correctly to allow it to be locked and closed using keys. It is important to ensure that the cylinder is in the center and has an elongated keyway.
It's not too difficult to install the latest uPVC door lock, however you must be cautious not to damage the door's frames or handles. If you are unsure regarding your ability to complete the task then you should seek out a professional locksmith who is approved by Checkatrade and has previous experience working on these kinds of doors. Locksmiths can save you time and money by completing the job quickly.
Reattaching the door handle
There are several reasons you might want to upgrade the lock on your front door. You may have lost a key to your lock and the previous tenant hasn't returned the keys, or you want to upgrade to the most secure lock. Changing the lock barrel on a uPVC door is a simple task that can be accomplished in about five minutes. You'll need a Phillips head screwdriver, a new lock cylinder and a spare key (if you plan to use one). Make sure that the door is propped up or secured so that it does not close during the process.
It is not as difficult as you may imagine to replace the lock mechanism on a uPVC door. Begin by determining what kind of lock is installed on your front door, then determine the size that you will need to replace it with. For older doors, there are strip locks and multipoint lock options. Once you've identified the manufacturer and type of lock that is on your uPVC front door, it's much simpler to find a replacement that is similar.
After replacing the cylinder, you'll need connect the door handle back to it. The first step is to loosen the set screw on the shaft of the handle with a screwdriver or Allen key. You can then remove the handle to expose the spindle shaft. If the shaft is threaded you'll have to loosen it a bit before backing it up using a screwdriver to ensure proper fit.
Test the lock after you have tightened the screws and the lock cylinder. Make sure that the key turns easily and fits well and that the locking mechanism of the handle is functioning well. Locksmiths can assist you if you're not confident making it your own.
Remember that uPVC lock mechanisms and door handles require regular lubrication to perform as they should. This is particularly true in areas that experience excessive wear and tear like those that are frequently used, closed and locked. By adding a tiny amount of lubricant could be a significant step towards prolonging their life and ensuring they function properly.
Testing the new lock
A upvc door lock is an essential element of your home's security. Like any other device it is susceptible to wear and tear over time or become damaged. Regular maintenance is crucial to a functional uPVC locking system. This can prevent malfunctioning issues from appearing and could compromise the security of your home. The best method to achieve this is by lubricating the internal mechanisms using an approved lubricant every six months. This will stop the lock from rusting and damage.
You can use a silicon spray in addition to the standard lubricant to loosen up the keyway. This makes it easier to insert the keys. This is a simple DIY solution that will save you money in the long term. Make sure you don't apply WD-40 as it will leave oil residue that could damage the lock.
It is essential to test the new cylinder upon installation before assuming it will function correctly. This can be done by testing the handle from both the inside and outside the door. You can now put the handles back into place and then re-insert the spindle screws if everything is in order. Re-insert all the screws that were holding the handles in place. Give yourself a pat on your back for a good job!
If you are seeking to increase your home's security A locksmith can install additional features, such as door chains or sash locks. They can also assist you to select the right locks for your home. A professional can help you determine what size of cylinder is the best for your doors. This is important since a wrong lock could compromise your security.
The cost of replacing a uPVC lock will vary based on the type of lock and the number of doors that need to be replaced. The average cost for a professional locksmith will range from PS75-PS100 per hour, but this price will vary depending on your location and the type of lock you require. Check out locksmith prices before selecting a firm.